 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NPN SILICON GERMANIUM RF TRANSISTOR NESG270034 NPN SiGe RF TRANSISTOR FOR MEDIUM OUTPUT POWER AMPLIFICATION (2 W) 3-PIN POWER MINIMOLD (34 PKG) FEATURES * This product is suitable for medium output power (2 W) amplification Pout = 33.5 dBm TYP. @ VCE = 6 V, Pin = 20 dBm, f = 460 MHz Pout = 31.5 dBm TYP. @ VCE = 6 V, Pin = 20 dBm, f = 900 MHz * Using UHS2-HV process (SiGe technology), VCBO (ABSOLUTE MAXIMUM RATINGS) = 25 V * 3-pin power minimold (34 PKG) ORDERING INFORMATION Part Number NESG270034 Order Number NESG270034-AZ Package 3-pin power minimold (34 PKG) (Pb-Free) 2 Note1, Quantity 25 pcs (Non reel) * Magazine case Supplying Form NESG270034-T1 NESG270034-T1-AZ 1 kpcs/reel * 12 mm wide embossed taping * Pin 2 (Emitter) face the perforation side of the tape Notes 1. Contains Lead in the part except the electrode terminals. 2. With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, contact your nearby sales office. Unit sample quantity is 25 pcs. ABSOLUTE MAXIMUM RATINGS (TA = +25C) Parameter Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current Total Power Dissipation Junction Temperature Storage Temperature 2 Symbol VCBO VCEO VEBO IC Ptot Note Ratings 25 9.2 2.8 750 1.9 150 -65 to +150 Unit V V V mA W C C Tj Tstg Note Mounted on 34.2 cm x 0.8 mm (t) glass epoxy PWB Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. Document No. PU10577EJ01V0DS (1st edition) Date Published September 2005 CP(K) (c) NEC Compound Semiconductor Devices, Ltd. 2005 NESG270034 THERMAL RESISTANCE (TA = +25C) Parameter Termal Resistance from Junction to Ambient Note Symbol Rthj-a Ratings 65 Unit C/W Note Mounted on 34.2 cm x 0.8 mm (t) glass epoxy PWB 2 RECOMMENDED OPERATING RANGE (TA = +25C) Parameter Collector to Emitter Voltage Collector Current Input Power Note Symbol VCE IC Pin MIN. - - - TYP. 6.0 600 20 MAX. 7.2 750 23 Unit V mA dBm Note Input power under conditions of VCE 6.0 V, f = 460 MHz 2 Preliminary Data Sheet PU10577EJ01V0DS NESG270034 ELECTRICAL CHARACTERISTICS (TA = +25C) Parameter DC Characteristics Collector Cut-off Current Emitter Cut-off Current DC Current Gain RF Characteristics Linner Gain (1) Linner Gain (2) GL VCE = 6 V, IC (set) = 30 mA (RF OFF), f = 460 MHz, Pin = 0 dBm GL Pout Pout VCE = 6 V, IC (set) = 30 mA (RF OFF), f = 900 MHz, Pin = 0 dBm Output Power (1) Output Power (2) Collector Efficiency (1) Collector Efficiency (2) VCE = 6 V, IC (set) = 30 mA (RF OFF), f = 460 MHz, Pin = 20 dBm VCE = 6 V, IC (set) = 30 mA (RF OFF), f = 900 MHz, Pin = 20 dBm VCE = 6 V, IC (set) = 30 mA (RF OFF), f = 460 MHz, Pin = 20 dBm VCE = 6 V, IC (set) = 30 mA (RF OFF), f = 900 MHz, Pin = 25 dBm - - - 31.5 60 50 - - - dBm % % 31.5 33.5 - dBm - 15 - dB 17.5 19.5 - dB ICBO IEBO hFE Note Symbol Test Conditions MIN. TYP. MAX. Unit VCB = 9.2 V, IE = 0 mA VEB = 1.0 V, IC = 0 mA VCE = 3 V, IC = 100 mA - - 80 - - 120 1 1 180 A A - C C Note Pulse measurement: PW 350 s, Duty Cycle 2% hFE CLASSIFICATION Rank Marking hFE Value FB SQ 80 to 180 Preliminary Data Sheet PU10577EJ01V0DS 3 NESG270034 TYPICAL CHARACTERISTICS (TA = +25C, unless otherwise specified) TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE 2.0 Total Power Dissipation Ptot (mW) 1.6 Mounted on glass epoxy PWB (34.2 cm2 x 0.8 mm (t) ) 1.2 0.8 Nature Neglect 0.4 0 25 50 75 100 125 150 175 Ambient Temperature TA (C) Remark The graph indicates nominal characteristics. 4 Preliminary Data Sheet PU10577EJ01V0DS NESG270034 S-PARAMETERS S-parameters/Noise parameters are provided on the NEC Compound Semiconductor Devices Web site in a form (S2P) that enables direct import to a microwave circuit simulator without keyboard input. Click here to download S-parameters. [RF and Microwave] [Device Parameters] URL http://www.ncsd.necel.com/ PA EVALUATION CIRCUIT TYPICAL CHARACTERISTICS OUTPUT POWER, COLLECTOR CURRENT, COLLECTOR EFFICIENCY vs. INPUT POWER 35 VCE = 6 V, f = 460 MHz IC (set) = 30 mA Output Power Pout (dBm) 1 000 30 Pout 800 25 600 20 IC 400 15 200 C 10 0 5 10 15 20 0 25 Input Power Pin (dBm) Remark The graph indicates nominal characteristics. Collector Current IC (mA), Collector Efficiency C (%) Preliminary Data Sheet PU10577EJ01V0DS 5 NESG270034 EVALUATION CIRCUIT (f = 460 MHz) VCE VBE R1 C4 R2 C5 L2 L1 L4 C3 RF OUT RF IN C1 L3 C2 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. EVALUATION BOARD (f = 460 MHz) GND VBE VCE GND R1 L2 C4 R2 L1 L3 C1 C5 SQ L4 C2 C3 34-04 Notes 1. 38 x 38 mm, t = 0.8 mm double sided copper clad glass epoxy PWB. 2. Back side: GND pattern 3. Solder gold plated on pattern 4. : Through holes 6 Preliminary Data Sheet PU10577EJ01V0DS NESG270034 COMPONENT LIST Component C1 C2 C3 C4 C5 L1 L2 L3 L4 R1 R2 Maker Murata Murata Murata Murata Murata Toko Toko Toko Toko SSM SSM Value 11 pF 9.5 pF 39 pF 10 000 pF 10 000 pF 390 nH 47 nH 5.6 nH 5.1 nH 15 10 Size (TYPE) 1005 1005 1005 1005 1005 2012 1608 2012 1608 1005 1005 Purpose Input DC Block/Input RF Matching Input RF Matching Input DC Block/Output RF Matching RF GND RF GND RF Block/Input RF Matching RF Block/Output RF Matching Input RF Matching Output RF Matching Improve Stability Improve Stability Preliminary Data Sheet PU10577EJ01V0DS 7 NESG270034 PACKAGE DIMENSIONS 3-PIN POWER MINIMOLD (34 PKG) (UNIT: mm) 4.50.1 1.60.2 1.50.1 2 0.8 MIN. 1 3 4.00.25 2.50.1 0.420.06 0.470.06 1.5 3.0 0.420.06 0.41+0.03 -0.06 PIN CONNECTIONS 1. Collector 2. Emitter 3. Base 8 Preliminary Data Sheet PU10577EJ01V0DS NESG270034 When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. * The information in this document is current as of September, 2005. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Preliminary Data Sheet PU10577EJ01V0DS 9 NESG270034 For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0504 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of NESG270034-AZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |